Saxon Lifts

The following information relates to the example here and on the right. To see some of the other lifts available to you please check out the Photo Gallery and the Case Studies.

Saxon Surface Mounted Goods Only Lifts

Saxon Surface Mounted Goods Only Lifts are designed and manufactured utilising high quality well engineered components. Direct acting hydraulic actuated telescopic lift rams are utilised to provide a safe, smooth operating, auto-self levelling system.

No ropes or chains are employed in the lift mechanism as these require mandatory regular inspection and periodic renewal which result in high operational costs.

The free standing, self supporting modular design can be either surface mounted and accessed at low level by a shallow ramp or recessed 80mm deep into the floor.

The lift unit is easily and quickly assembled on site and can be readily repositioned should the occasion arise. The lift gates are of folding shutter design and not the cumbersome hinged door type.

Special design features may include

The picture on the right for example, may include all or most of the following features. * Please note that locations which differ from the example given may require different features.

» low cost of ownership
» 2,000kg capacity (**Standard design)
» Min 1,000kg through to Max 4,000kg capacity
» robust modular construction
» fully clad lift shaft
» raise and lower speed 120mm per second
» faster lift speeds can be specified
» no lift pit required *
» will serve three levels to eight metres (as standard)
» rated for high frequency operation **
» shaft top lighting
» fail safe operation
» optional buffer post protection and access ramp
» emergency lowering in event of mains failure
» easily and safely maintained
» low cost of ownership
» design complies with CE machinery directive
» optional lift car vertical rise barriers

** Please note that the "standard capacity" for this model goods lift is only 2,000Kg (2 tonnes). This can be upgraded at your request.